RTourisLV3Online
Following: 1Followers: 4
Forums/ Pharos Wireless Bridges
2017-04-06 17:34:08
CPE510 / 210 - When in PtP mode is there any benefit from using MAXtream and QoS?
Model : Hardware Version : Firmware Version : ISP : As per the title..in a simple Point to Point deployment, as in AP / Client is there any real-world measurable benefit from using MAXtream and QoS?...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-03-27 03:39:38
CPE510 station Rx rate drops to 6Mbps momentarily
Model : Hardware Version : Firmware Version : ISP : Hi forum, i've been noticing the Rx rate of most of my deployed PtP stations fluctuating a bit for example from 120 to 180Mbps on MCS12 - 20/40Mhz...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-03-24 15:44:12
Re:CPE210/510 WebServer MAC authentication fail?
Informative as always...However looking back at the user's guide why is there explicit reference to local access, i.e. "a ll the PCs in the local area network are allowed to access the device's web...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-03-23 21:29:58
Re:CPE210/510 WebServer MAC authentication fail?
gave it another shot...whenever the laptop locally is behind a router that's setup after the CPE it's a no go...I suppose it's a double NAT thing that's causing this as the second router has it's own...
0HELPFULS
Forums/ Pharos Wireless Bridges
2017-03-23 18:48:51
CPE210/510 WebServer MAC authentication fail?
Model : Hardware Version : Firmware Version : ISP : ..so I was testing this added layer of authentication security found in the management tab of the web interface. The User Guide explains, p85...
0HELPFULS
Forums/ DSL Modem Routers
2017-03-23 17:22:55
Unable to manage a cascaded TD-W9980 routed via EWAN emotely
Model : Hardware Version : Firmware Version : ISP : Hi all, puzzling issue here...let me elaborate. i have a small home network managed by a primary TP-Link modem / router, the TD-W8980. I added a...
0HELPFULS
1232425...