@Blackredgold Hi, Recently, some of TP-Link's "AC1200" range extenders have received firmware version 1.0.50, which adds the feature you are asking for. (it goes under the description "Added the...

@mooney131 http://192.168.0.254 should be the default IP address of any TP-Link range extender that is either brand new or has just been reset. Of course you need to be connected to the RE190's...

@Mikee46 Then it gets more complicated. If you suspect a settings issue, then you could try the following. 1) "Backup" the Archer C80's settings to a file on the disk via the menu "Advanced" ->...

@Mikee46 Hi, If you've got a Mesh consisting of an Archer C80 and two RE300 and you want to test the Wi-Fi performance of the Archer C80, then I recommend to pull the two RE300 out of their sockets...

@Antonis11111 Hi, You can try to get a little bit more speed by reducing the distance between the two TL-PA4010P. However, note that you will never be able to reach more than about 90 Mbps with the...

@NoName_2002 Hi, Can you test if the 5 GHz stays connected after you separate the 2.4 GHz band and the 5 GHz band into two different SSIDs on the Orange Funbox 3.0 ?