@VikramSolanki "Channel Width" is something different. It won't change the control channel. A "Channel" selector on common Wi-Fi routers would have settings like "Auto", 36, 40, 44, 48 and so on....

@CT99 I have no idea why the description says "... to allow specific devices to access the specified services", but these rules should open the IPv6 firewall to allow for any remote device to access...

@TNT21 Hi, A few points here. 1) The TL-WPA4220 only supports 2.4 GHz Wi-Fi. Therefore you don't need to worry about 5G. 2) When performing the procedure of pairing Powerline adapters it is...

@VikramSolanki Hi, The first thing to try would be to configure your Wi-Fi router to use channel 36 in 5 GHz band, because this channel is (apart from one or two countries) most commonly supported by...

IPV6 incoming Firewall Rules - where are they @CT99 Hi, Normally they should be where they can be seen in the Emulator for the BE230 https://emulator.tp-link.com/be230v1/index.html#/ipv6 (scroll down...

@Zeemalik The "IP Address" being different every time you connect is quite normal. No need to worry about it. The "Status" information on the screenshot you posted looks fine to me. I have no idea...