@Condado Hi, Basically all range extenders made by TP-Link have a small (usually recessed) button labeled "Reset" on them. While the range extender is powered ON, press and hold that small button for...

@dannello1234 Hi, In that case you should try if the speed increases if you plug the TL-WPA4220 into another wall socket that is closer to the TL-PA4010. Note that the Powerline adapters of the...

@Kamiluu According to some posts by TP-Link support staff in this thread https://community.tp-link.com/en/home/forum/topic/593722?replyId=1298204 the Archer AX53 V1 will also receive a firmware...

@zefeena Hi, The Wi-Fi is only built into the TL-WPA4220. Therefore, a single TL-PA4010 is essentially useless.

@Milan_b Ok. Also make sure two Archer C6 are not too far away from each other when attempting to add the Satellite. (preferably within the same room) Since both routers are Archer C6 V4, have you...

@Milan_b It is okay to login to change the mode to "Satellite". But after the mode was changed (rooter will reboot automatically) you should not login again. By the way, personally I find it much...