woozleLV6Offline
Following: 0Followers: 27
Forums/ Wi-Fi Routers
2023-12-28 14:44:26
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Milan_b Ok. Also make sure two Archer C6 are not too far away from each other when attempting to add the Satellite. (preferably within the same room) Since both routers are Archer C6 V4, have you...
0HELPFULS
Forums/ Wi-Fi Routers
2023-12-28 14:25:22
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Milan_b It is okay to login to change the mode to "Satellite". But after the mode was changed (rooter will reboot automatically) you should not login again. By the way, personally I find it much...
1HELPFULS
Forums/ Wi-Fi Routers
2023-12-28 14:09:14
Re:EasyMesh Routers Support Building a EasyMesh Network via Ethernet Backhaul NOW
@Milan_b Hi, Note that it is very important that you do not create a login password and log into the router that is to become the EasyMesh Satellite after you have prepared that router by changing...
1HELPFULS
Forums/ Range Extenders
2023-12-27 22:27:37
Re:Need to extend WiFi signal strength
@Philiprb I am glad to hear you have found a working solution. By the way, for the TP-Link Wi-Fi extenders to work correctly when connected via the Ethernet line coming from the house they have to be...
0HELPFULS
Forums/ Powerline Adapters
2023-12-27 20:24:50
Re:MESH CAPABLE AFTER UPGRADE?
@tfp2 Hi, That's interesting. Can you please post the link to the TP-Link webpage that states Onemesh is coming to ...?
0HELPFULS
Forums/ Powerline Adapters
2023-12-27 17:02:12
Re:TPplc shows 600mpbs powerline rate, PC won't go above 200
@Nossah Hi, The "Powerline Rate" is likely a calculation based on the carrier frequencies and the modulation schemes that have been negotiated between two Powerline adapters. The Powerline adapters...
0HELPFULS
1418419420...