@SteMcc So were you able to enter the router recovery mode - as I understood on some models you have to hold the WPS button and on other the Reset button for 5 seconds after power on, until there’s...

@SteMcc If you get an error during the manual update, you can follow the FW recovery procedure here (Case 2) to update it.

@ArjanKS TL-WA1201 is a dedicated access point - it doesn't have any routing capabilities - that' why you can't change the address to 10.X.X.X. In Multi-SSID mode the TL-WA1201 should be used in...

@thatman84 Your settings seem fine. In Step 3 (for VR600) - set Internet Connection Type:Static IP with IP address 192.168.0.2, mask 255.255.255.0, GW 192.168.0.1. Another approach would be to use IP...

@iandouglas Update your VR600 FW to the latest release from here. It seems that VR600 v3 doesn't support USB printer feature - check Chapter 9 from its user guide - here.

@AitorC Here's what AP isolation does. Here's why IoT network was created for - it's just another SSID. Both won't do the job in your case since your C80 is in AP mode. The only way to ido what you...