@mdynas You can try this suggestion and check if it works for you.

@SaurabhS Try disabling the C80 UPnP feature and test again. UPnP feature is opening ports upon client devices' request and they are already open:

@SteMcc So were you able to enter the router recovery mode - as I understood on some models you have to hold the WPS button and on other the Reset button for 5 seconds after power on, until there’s...

@SteMcc If you get an error during the manual update, you can follow the FW recovery procedure here (Case 2) to update it.

@ArjanKS TL-WA1201 is a dedicated access point - it doesn't have any routing capabilities - that' why you can't change the address to 10.X.X.X. In Multi-SSID mode the TL-WA1201 should be used in...

@thatman84 Your settings seem fine. In Step 3 (for VR600) - set Internet Connection Type:Static IP with IP address 192.168.0.2, mask 255.255.255.0, GW 192.168.0.1. Another approach would be to use IP...