@DasGoG Actually the TP-Link router is doing a simple NAT - that's why when you connect a PC to the TP-Link router, you have an internet access. I would configure Starlink in bypass mode - it would...

@Celitron18000 You should also know that almost every wireless router can work as an AP - details. The advantages of TL-WA1201 is that it's a dedicated AP which supports VLANs. But if you don't use...

@Tail_uk This behavior is probably due to Smart DHCP feature - just set your other APs with a static IP (DHCP turned off) and these requests should stop.

@DasGoG Beware that TP-Link router doesn't understand VLANs. I believe that there\s no need of static route on the TP-Link router.(its NAT table should do the work). On the SG you should have a...

@Maccone Most probably that means you're behind ISP NAT. To be able to use virtual servers (port-forwarding) you need a public IP address on your ER707-M2 WAN port. Go the WAN port status (facing...

@TPint You can also check your Telephony menu settings - Chapter 6.3 from the VR2800v user guide and edit your telephone number according to your needs. In any case, I would contact the landline...