@Limejuice If your ISP modem is in bridge mode then Archer C64 should be in wireless router mode and do the NAT for your local network. If the ISP modem is doing NAT already then Archer C64 should be...

@Matt_V If you set in AX23 LAN DNS field only the LAN IP address of your Microtic router is there any change ? Can you provide a screenshot of your LAN configuration (for example): And ethernet port...

@Gossy You can turn your TD-W9970 into an access point by connecting to your main router with an ethernet cable using this guide. That's your only option to extend the wireless coverage of your main...

@Dawarbaba Login the RE450 WebGUI and make sure that 5GHz band is enabled: If it is enabled, check your main router 5GHz band current wireless channel and make sure you're using channels in this...

@Sidhant The easiest way to check if MAC address is the issue is to compare your OLD router WAN MAC address clone settings and set the same MAC address to the new router. If that desn't work, you...

@mkfzdmr To isolate a BE550 issue, you can test building the PPPoE session with a laptop and check if you can access the internet - use this guide. In this scenario you have to connect your laptop...