@Noli1 If your main router LAN IP address is in 192.168.1.0/24 subnet you could set RE3000X with a static IP address 192.168.1.254 for better experiance and easier access. Switch your RE3000X DHCP...

@techdoubts Here's a troubleshooting guide on that matter. If you have 20 wired clients that means you're using an additional hardware like network switches - you can isolate them and check if they...

@jwka What you have described is exactly what it does. Here the guide for configuring the rouyter in AP mode (Case 1).

@Mon_Mon The guide you mentioned was probably written when Archer C6 v2 was released and there may be some WebGUI differences - chefck this video. You can check in your Archer C6 v4 - according to...

@Floofy_Poofy Most probably you were with FW v1.2.6 before the cloud update. Don't worry about that - they probably changed that in the new v1.3.2 and it works like an "Auto" option. Since you're...

@Floofy_Poofy They must have modified these settings in different HW/FW releases. What's your AX55 hardwaare version - this should printed on its bottom sticker. Also check which is the FW version...