terziyskiLV7Online
Following: 0Followers: 30
Forums/ Wi-Fi Routers
a week ago
Re:Transfer router settings
@Kiezelke The short answer is no. You have to copy/paste your settings using a notepad or similar app for your ease.
0HELPFULS
Forums/ Wi-Fi Routers
a week ago
Re:Archer C6 v2.0 - wifi signal with a lot of interference
@Mordep 2.4GHz wireless radio flapping is not normal - try using non-overlapping channels like 1,6 or 11 for 2.4GHz band and test the signal strength again. If this issue persists then you probably...
0HELPFULS
Forums/ Switches
a week ago
Re:Cannot login to switch on 192.168.0.1
@rhimbo What's your main router (Synology RT2600ac) LAN IP address ? To login the switch via web browser you need to make sure that the route between the host PC and the switch is available, i.e....
0HELPFULS
Forums/ Wi-Fi Routers
a week ago
Re:thunderstorms breaks my C6
@AbrarMasum I the device is under warranty your local service or your retailer would be the best bet for assistance. Most probably the router is dead and if it's not under warranty you should start...
0HELPFULS
Forums/ Wi-Fi Routers
a week ago
Re:NAT Forwarding
@PLoOc The error message comes up because you can't open a particular port to two different IP addresses (192.168.1.7 and 192.168.1.10). It should be one or the other. If you want to have access to...
1HELPFULS
Forums/ Wi-Fi Routers
a week ago
Re:Archer C6 v2.0 - wifi signal with a lot of interference
@Mordep Archer C6 v2 is a Onemesh capable router and the hidden SSIDs that you see are part of that feature. If you want to disable this feature you can do that from the router WebGUI switch button...
1HELPFULS
1567...