@JulieUF This setup should work even if the VR600v is in DSL modem router mode. Glad to hear you've managed to setup it up. In fact, you gain one LAN port more since in wireless router mode LAN4...

@JulieUF There's no need to have two routers in this case since that will cause a double NAT in your network. You can use your VR600v in AP mode instead and keep its devices connected by using the...

@MartinGrossmann You've misunderstood the backup feature, but I have to admit that on the screenshot you posted it's a ittle bit misleading. Actually the only backup connection for these DSL momdem...

@EnricoR I have to reproduce the steps but in general, when configured time to be online is 0, a warning pops up and warns that the devices won't have internet access at all and you just have to...

@Marc_21 Ideally they should be connected to the router separately to avoid any bottleneck, but you can connect them in series if there's no other option.

@Marc_21 You can use a switch in the topology like: Router->Switch->AP1 | ->AP2 or use the topology you described. Wireless channels can be set to "Auto". You can set the AP1 and AP2 SSIDs the same...