@Yacinov83 The theoretical bandwidth maximum can be achieved by selecting wireless channel 36 and channel bandwidth 80Mhz: If you have any issues on wireless channel 36 set it back to Auto.

@Cadas To access the router from a network outside of your local network, you should type your router's WAN IP Address into your browser's Address, followed by a colon and the custom port number. For...

@Fool01 If that is implemented in the current FW version using SNMP and a MIB browser you should be able to read these values - part of the standard ADSL-LINE-MIB with OID .1.3.6.1.2.1.10.94.1 DSL...

@Yacinov83 Make sure that QoS is not enabled on the VR600. You can try setting channel width to 80Mhz for 5GHz band and test if that makes any difference:

@jmronair Yes, it's good enough to cover your needs for wireless coverage along with the option to connect up to four wired clients like your IP camera. If you feel you need the newer wireless...

@KristhanH There should be a switch button to turn on 24-hour time format: