@mystique That's your issue actually - you have a private IP address instead of public. The only way to resolve this is to call your ISP and ask for a public IP address to be provided. The guide I...

@PGB1 Yes, that's correct. You can even restrict the guest devices to see each other if you need to by uncheck the upper setting.

@mystique Use this guide to configure FTP on your router and make sure the IP address you're using for remote accessing the FTP server, is your public IP address, i.e. not in the following list:...

@cbarnasthpol No, OneMesh doesn't support ethernet backhaul - OneMesh FAQ - Q5/A5. But these two models (AX10 and AX55) are going to receive an EasyMesh FW upgrade, which eventually will allow that,...

@PGB1 Guest network is a wireless network, so if you connected your printer wirelessly to the guest network you can isolate the guest network: If you connect your printer by an ethernet cable to the...

@JohnMaravelo Check your network configuration - the message for an IP conflict means that the IP address of your Windows computer is conflicting with another device on your network. That's probably...