@Tefa2022 After you have HTTPS enabled, try the following: If the router IP address is 192.168.0.1 type in the address bar - https://192.168.0.1 Clear the browser cash and reboot the router, then...

@Macrox It's quite possible that the early EasyMesh FW allows the hidden networks in AP mode, even EasyMesh feature has been disabled in "Router mode". Thanks for reporting this behavior.

@realmac Use a computer to connect to the router with an ethernet cable, connected to one of the router's LAN ports. Use this guide to determine router's IP address and open it in a web browser - you...

@DysonSphere @skogach Refer to this post - TP-Link are aware of this issue and they most probably would release a beta FW to fix that until they come up with a next stable FW release. Meanwhile don't...

@Tefa2022 I understand your point, but this is about a combination between the physical characteristics of the router's LAN port and the cables's RG45. That's why I suggested this workaround. Just...

@Tefa2022 You've correctly found the reason for this issue - the negotiated bandwidth of the PC1 and PC2. What you can do is to use ports LAN3 and LAN4 for those PCs and check again the negotiated...