@Jav80 Like I posted - most probably your EAP245s are negotiating 100mbps (instead 1000mbps) speed with your VM Hub3 due to the cabling. You pointed that VM Hub 3 is a gigabit router but in the end...

@Ulises_Lopez First determine your FW region by the router bottom sticker - here's a reference. If you're with the EU FW region use this link. If you're with the US FW region use this link.

@lamertea There's no workaround in this situation - your only hope is your ISP.

@lamertea Most probably that's due to a so called CG-NAT if oyu r PPPoE address is in this range 100.64.0.0 to 100.127.255.255. In this case you should talk to your ISP to check the technical...

@KennyMcCormick Refer to this document for setting the wireless channels. You can scan for wireless interference around you with a tool like inSSIDer or WIFI Analyzer to choose the less crowded...

@Jav80 Make sure that the ethernet ports on your router where the EAP245s are connected, have negotiated 1000mbps (not 100mbps) speed. If that's not the case then set your EAPs SSID to be different,...