@Jav80 Make sure that the ethernet ports on your router where the EAP245s are connected, have negotiated 1000mbps (not 100mbps) speed. If that's not the case then set your EAPs SSID to be different,...

@LesW Yes, that's an option in 801ND user guide. But in reality you can check when switch 801ND to "Range Extender" mode and see if there's such an option - it really depends on 801ND current FW...

@Ulises_Lopez You should be able to downgrade your C5 to the previous FW release - use this guide (Case 1) for reference.

@HanSam Check this feature request and you'll find your answers. There's a new upcoming mesh standard - EasyMesh - I think that the focus would be shifted there.

@MagdyZ For hardware print servers there is a tutorial for manual installation under Linux - here. But we are talking about VR600 DSL modem router software print server controller which doesn't...

@Tnimni Check this thread for details - its for VR300 but the guide covers the VR400 as well. Keep your VR400 in DSL modem router mode when doing the configuration. This post will answer your first...