AX6000 traffic log only shows current day

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX6000 traffic log only shows current day

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX6000 traffic log only shows current day
AX6000 traffic log only shows current day
2021-07-21 01:04:45
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.2.3

Title says it all. Pretty useless log that only shows 1 day's worth of traffic, isn't it supposed to show a week? 

  0      
  0      
#1
Options
4 Reply
Re:AX6000 traffic log only shows current day
2021-07-22 06:03:33

@dmnmes123 

 

You should be able to monitor the traffic usage of a specific device or all connected devices in 10 minutes, 24 hours or 7 days. Choose Weekly on the top-right:

  0  
  0  
#2
Options
Re:AX6000 traffic log only shows current day
2021-07-22 14:09:15

@Kevin_Z 

 

I agree, you should be able to. However, it does not show anything for 7 days, only for 1 day or hourly. Every time I've checked the router it only shows the current day under daily, and I haven't rebooted it or anything. 

Kevin_Z wrote

@dmnmes123 

 

You should be able to monitor the traffic usage of a specific device or all connected devices in 10 minutes, 24 hours or 7 days. Choose Weekly on the top-right:

 

 

 

  0  
  0  
#3
Options
Re:AX6000 traffic log only shows current day
2021-07-23 02:24:08 - last edited 2021-07-23 02:26:19

@dmnmes123 

 

How about QoS? Enable and configure the QoS settings first, have it either set to something other than Standard or set at least one client as High Priority, then check the Traffic Monitor to see if it records correctly.

 

  0  
  0  
#4
Options
Re:AX6000 traffic log only shows current day
2021-07-23 03:38:35

@Kevin_Z 

Kevin_Z wrote

@dmnmes123 

 

How about QoS? Enable and configure the QoS settings first, have it either set to something other than Standard or set at least one client as High Priority, then check the Traffic Monitor to see if it records correctly.

 

 

 

I do have QoS enabled, although it seems a bit limited (although so is my experience so I could be wrong.)  I have a few devices set to higher priority, other than that there doesn't really appear to be many options. Having it enabled/disabled seems to have no affect on the traffic monitor. Good thought though, thanks

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 670

Replies: 4