Parental Controls not working

Parental Controls not working

Parental Controls not working
Parental Controls not working
2024-01-26 16:14:12
Model: Deco XE5300  
Hardware Version: V6
Firmware Version: 1.2.8 Build 20230901 Rel. 36505

I have been using the deco mesh system for almost 2 years and have never gotten the Parental Controls to work.

 

I have even paid for the Premium Homeshield package to get Advanced Parental Controls-  still no luck!

 

The deco system is able to block devices, but it works intermittently.

 

I have to manually add and remove devices from my child profiles in order for them to access or be blocked from the internet.

 

The scheduled block times may block a device, but then when the scheduled downtime ends, it does not unblock it.

I have to delete the device from the child profile for it to regain access.

 

The behavior is not the same all of the time either.

 

Right now, in an effort to figure this out, I have just factory reset my main deco and started over.

 

The parental controls will automatically block a device as soon as it is added to a profile, even if there is no blocking, schedule, or time limit.

 

Has anyone had success with Parental Controls?

 

 

Thanks for any ideas!

 

  3      
  3      
#1
Options
11 Reply
Re:Parental Controls not working
2024-01-27 02:45:13

  @drat242 

 

Here's a guide for configuring Parental Controls with HomeShield on Deco XE5300.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Parental Controls not working
2024-04-13 04:16:45
I’m also experiencing issues with blocking and unblocking devices. I actually returned the XE200 thinking there was something wrong with the device and bought the XE75 Pro and I’m still having the same issue. For testing I only connected two devices and blocked one but it still has access to the internet. This makes the parental controls worthless.
  3  
  3  
#3
Options
Re:Parental Controls not working
2024-04-15 04:41:43

  @Pinky-12 I have been troubleshooting this with the TP-link support team since October last year.  One person left and the case sat idle, but I finally got their attention again.  They have not solved it yet.  We tried a special firmware test but no luck yet.  I honestly don't understand how this can exist in the marketplace and not function.  Are we the only people using parental controls?!  That is impossible.  My hunch is that people struggle with it and don't understand whether it is working or not.  
 

attention TP-link-  please do not send me instructions on how to use the parental.  Believe me,  I know exactly how they are supposed to work and how to use them.  
 

just please fix the issue.

It should be very easy to replicate.

 

Here is an example of a recent test attempting to isolate the issue using a separate network configured with one deco that we factory reset to test a firmware update:

 

Here were the steps I took:

  1. Reset one of my current satellite Decos that is v1 model
  2. Set this up as a new main deco directly connected to the modem (connecting by ethernet to the other main deco was not recognized)
  3. Connected Chromebook device to the new network - CONNECTS TO INTERNET
  4. Created a test profile on the new network
  5. Added the device to the profile:  STILL  CONNECTS TO INTERNET
  6. Added future Bedtime (all other restrictions disabled)  STILL  CONNECTS TO INTERNET
  7. Changed bedtime to now:  SUCCESSFULLY BLOCKS INTERNET TO DEVICE
  8. Changed Bedtime back to Future FAILS TO CONNECT TO INTERNET
  9. Tried rebooting the Deco, FAILS TO CONNECT TO INTERNET
  10. Removed device from the test profile:   ABLE TO CONNECT TO INTERNET
  2  
  2  
#4
Options
Re:Parental Controls not working
2024-04-15 06:45:50

  @drat242 

 

I see that in your initial post you mentioned a FW release for HW v1.60 - 1.2.8 Build 20230901 Rel. 36505

Looking at the support portal I see a pretty new FW release - Deco XE5300(US)_V1.6_1.3.2 Build 20240119 with optimized HomeShield function.

Have you tried to do the same test that you've described with this new FW release ? What is the FW version of your HW v1 unit ?

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#5
Options
Re:Parental Controls not working
2024-06-20 14:07:17 - last edited 2024-06-20 14:07:54

  @drat242 

I am experiencing this same issue as of May 2024

Not time constraints working for kids and no traffic hours showing. Have had the kids devices set up this way for 2 years. Removed a device and added back to test and still does not report hours used. I had turned on iOT network in May, but after seeing this issue turned it off. Still have no tracking of hours/devices for parental controls. I can see the devices under parental control if a child is online, but nothing more.

 

Model: X20

Firmware: 1.2.4 build 20231206 Rel. 32618

  0  
  0  
#6
Options
Re:Parental Controls not working
2024-11-13 07:39:44 - last edited 2024-11-13 07:42:09

  @SouthTech I have 2 X20 decos and the parental controls do not work.

they do not block websites and bedtime, web filter and off time do not work, and adult websites are not blocked when profile is set for 6 year old.

So a useless product sold to the masses by Onenz (Vodafone nz)

Trying to get support is a waste of time, I wasted weeks talking to different support people with no results.

Do not buy this product if you want to keep children safe.

If anyone at Tplink wants to help by sending me a product that works I will update this post.

  1  
  1  
#7
Options
Re:Parental Controls not working
2024-11-20 04:12:05
I’m having similar issues as I start using parental controls. I noticed that whenever I make a change to a profile, I have to reboot the whole network to get it to work correctly. I have paid for the monthly subscription to get advanced controls but am unhappy with it. Xfinity parental controls were flawless. TP-Link is a joke.
  1  
  1  
#8
Options
Re:Parental Controls not working
2024-11-20 06:50:35

  @KiwiJ I just received my Deco X50 today from One NZ as i was having terrible internet connectivity issues. I have been trying all day to get the parental controls to work but with no luck. I have turned off the Private WiFi address options on our ipads and iphones but adding a device to the block list, or blocking a profile, doesnt work. No matter what i do everyone that is joined to the network continues to have internet access. After reading the large number of posts, including yours,  saying that parental controls don't work I'm just feeling relieved that due to the one month free trial I haven't wasted the thirty five dollar annual subscription fee for Advanced Parental Controls. It sounds like there is no hope of fixing so I'm cancelling my subscription now! 

  0  
  0  
#9
Options
Re:Parental Controls not working
3 weeks ago

I just set up my new x60 system today, and the parental control system is broken. Any devices added added to a profile has internet blocked. Even when that profile has no blocking rules and should allow all access.
This doesn't happen immediately for a newly created profile, but starts after some time.

 

How is TP-Link expecting to make money from parental control subscriptions if the free functionality doesn't even work?

This is pretty basic... is there no QA/Testing on this product and software?

  0  
  0  
#10
Options
Re:Parental Controls not working
Yesterday

  @drat242 

I am having the same problem with Parental Controls blocking my kid's device when added. No settings are allowing internet even during allowed times.  It worked great for a few months, but now blocks internet on any device I add to the profile.  I have deleted and recreated the profile several times, with no luck.  I spent quite a bit of time with tech support and was eventually told my hardware had to be replaced.  Though it's under warranty they do not offer cross/advance shipping so I would not have a router or wifi until they checked my hardware and sent me a new set.  This could take weeks and was not acceptable to me. I have a three pack of X50s. I was hoping a recent firmware update (1.6.1 Build 20241010 Rel. 65389) would help but it still has the same problem. Please TP-link address and fix this issue.  I cannot recommend your products with this kind of service.

  0  
  0  
#11
Options