Home Network Community > Wi-Fi Routers > Archer C60, WPA2-PSK (AES), on all the time or not?
< Wi-Fi Routers

Archer C60, WPA2-PSK (AES), on all the time or not?

Archer C60, WPA2-PSK (AES), on all the time or not?

Archer C60, WPA2-PSK (AES), on all the time or not?
Archer C60, WPA2-PSK (AES), on all the time or not?
2024-05-22 13:03:16
Model: Archer C60  
Hardware Version: V2
Firmware Version: 2.0_210407

The issue was raised in the past.
Although I set the Wi-Fi security on the Archer C60 router to WPA2-PSK (AES), my iPhone still shows the Wi-Fi security as Weak.
This is the latest firmware available from TP-LINK.

Any suggestion to resolve this issue?

 

  0      
 
  0      
 
#1
Options
1 Reply
Re: Archer C60, WPA2-PSK (AES), on all the time or not?
2024-05-22 17:13:09

  @N5MOH 

 

Here's a description of this problem (Case 1).

For Archer C60 v2 you have to contact your local support (noted in the solution section).

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 73

Replies: 1

Related Articles
Archer C60, WPA2-PSK (AES), on all the time or not?
1283 0
Client will connect with WPA2-PSK [AES] only but not if I turn on WPA3 + WPA2-PSK [AES]
755 2
Archer C60 Weak Security Message IOS14 after setting WPA2 and AES
5932 0
Frustration over WPA2-PSK+AES
366 0
ARCHER C60
129 0
Archer C60 and Playstation 4
1215 0
About Us
Press
Copyright © TP-Link USA Corporation. All rights reserved.