Home Network Community > Deco > Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
< Deco

Official Release Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Official Release Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Official ReleaseDeco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-08-01 07:33:13 - last edited Thursday
Tags: #Firmware Update #Official
Model: Deco XE75   Deco XE75 Pro  
Hardware Version: V1
Firmware Version:

This Article Applied to

Deco XE75_V1/V1.6

Deco XE75 Pro_V1/V1.6

 

 

Firmware Modifications

1. Added Camera Security.
2. Added Wi-Fi Access Control to support "Block List" and "Allow list".
3. Added Eco Mode and Wi-Fi Schedule.
4. Supported Portal authentication for Guest Network.
5. Supported Matter.
6. Supported detection of Ethernet Backhaul link speed.
7. Support KLAP protocol and optimize the collaboration with Tapo smart devices.
8. Support firmware Auto Update.

Bug fixes

1. Fixed the bug that the 6GHz SSID will be synchronously modified when modifying the 5GHz SSID.

 


Firmware Version Build

Deco XE75_V1/V1.6 1.4.1_Build_20240722 Newly updated to 1.10.0 Platform
Deco XE75 Pro_V1/V1.6 1.4.1_Build_20240722 Newly updated to 1.10.0 Platform

Notes:
1. This firmware can not be degraded to the previous version directly via web UI.
2. Please make sure the Deco APP is up-to-date.
3. Some features might not be available when there are other models in the Mesh network.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.-Solution
Thursday - last edited Thursday

Hi All,

If you have any further questions about the 1.4.1 firmware release,  It's suggested that you comment on our Global Forum Post for our Development Team to look at directly. We'll be locking this one for now to help keep the discussion focused in one thread.

Help Test and Provide Your Feedback for Deco XE75/XE75 Pro_V1_1.4.1

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#12
Options
11 Reply
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-08-06 17:28:06

  @David-TP WHY CANT I DOWNLOAD THIS?

  0  
  0  
#2
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-08-12 20:19:50

  @David-TP 

Any chance we'll see Matter support on XE70/Pro? 

  1  
  1  
#3
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-09-09 17:24:35

  @David-TP Just updated to this from 1.25 and now my wired ports dont go above 100mb.  they where fine on 1.25 so might roll back just wanted to give a heads up on this

  1  
  1  
#4
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-09-10 02:41:18

  @Sorbert 

Hi, Do you refer to all Ethernet ports on the main Deco, or the one connected to the ISP cable modem?

Please restart the main Deco once, then try to replace a new Ethernet cable to connect the main Deco XE75 Pro to the ISP modem.

It is also suggested to check the OQS settings and confirm it is disabled.

 

I haven't received a similar feedback about the 1.4.1 in the past few weeks. I believe it is not related to the firmware.

PS: if you want to roll back to 1.2.5, a firmware recovery is required: How to use firmware recovery

 

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-09-10 23:00:08 - last edited 2024-09-10 23:00:19

Can the TP-Link team explain why, if these are "Official Release", why these are posted here first and not on the download center or available via Auto Upgrade? 

Don't understand why one would need to look in two places and dig around for updates. 

Very sad.

  1  
  1  
#6
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-09-11 02:03:10

  @gipnyc 

Hi,  the Deco firmware release is gradually rolling out in waves. Some users may have already detected this version and auto-updated via the Deco APP, while others might need a while. Sometimes, if a new version has introduced numerous software features that have been requested in the past, we will start a post and invite more users to test the new version.

 

Usually, the firmware will be uploaded to Download Center first and this version will be as well. In rare cases where there is a delay of 1-2 weeks in the internal process, as time is valuable, the community hopes to start the test first. 

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#7
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-09-17 14:37:29

  @David-TP Since this new firmware I can't get ethernet backhaul to work.  And, you've taken that option out of the previous firmware..

I'm going to have to fall back to previous firmware.

  1  
  1  
#8
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
2024-09-19 01:52:14

  @Derwood9937 Hi, Thanks for the feedback.

Did you use any network switch to establish Ethernet Backhaul?

---If possible, can you connect one of the satellite Deco XE75 pro directly to the main Deco via an Ethernet cable to check whether the Ethernet Backhaul could be restored?

As far as I know, the 1.4.1 version hasn't adjusted the Ethernet Backhaul logic and it should continue to function as effectively as before.

 

Which firmware version do you plan to fall back to?

You could refer to this link to properly revert the firmware: How to Downgrade Deco

 

Wait for your reply and best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#9
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
Thursday

  @David-TP Hi, I have some issues with my XE75 after I upgraded it to 1.4.1. It kept rebooting itself randomly everyday, 2 or 3 times. How can I degrade it back to the old firmware? Thank you.

  1  
  1  
#10
Options
Re:Deco XE75/XE75 Pro V1 1.4.1 with Matter, Wi-Fi Access Control, ECO Mode and More.
Thursday - last edited Thursday

  @ComP1ex 

Hi, Thank you for the feedback.

Do you want to downgrade to 1.4.0 or 1.3.2?

For 1.4.0, it could be implemented via web UI directly.

For 1.3.2, the firmware downgrade needs to be through a firmware recovery case.

All detailed instructions can be found at How to Downgrade Deco.

 

By the way, would all Deco units auto-restart, or just the main Deco?

I would like to follow up on your case via email in case you need further assistance.

Thanks a lot and Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 1739

Replies: 11

Tags

Firmware Update Official
Related Articles
Wi-Fi issues with my XE75 Pro
2206 3
 XE75 Pro
521 0
 SQM solution for Deco (XE75 pro)
122 0
 Wiring Deco XE75 Pro
2470 0
 AT&T Fiber and Deco XE75 Pro
1820 2
 Deco XE75 Pro Speed
1616 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.