Deco X55_V1.26 - DoH\DoT Availability

Deco X55_V1.26 - DoH\DoT Availability

Deco X55_V1.26 - DoH\DoT Availability
Deco X55_V1.26 - DoH\DoT Availability
2025-04-09 04:22:51
Model: Deco X55  
Hardware Version: V1
Firmware Version: 1.4.6 Build 20250211 Rel 39448

Looking to get the preview access with DoH\DoT on hardware version 1.26 or understanding of the update cycle of the Deco units. 

  • What is the firmware update cadence?
  • Why is there a difference between hardware versions 1, 1.26, and 1.6 - noticed that 1 & 1.6 are similar HW and 1.26 is different (why) 

Is there any models that are available to purchase that support Doh\DoT - can someone provide a list? 

 

 

Thanks in advance!

  5      
  5      
#1
Options
3 Reply
Re: Deco X55_V1.26 - DoH\DoT Availability
2025-06-24 13:03:41

Also looking for this information. All models but the 1.26 having doh is really frustrating honestly. 
 

Thanks 

  2  
  2  
#3
Options
Re: Deco X55_V1.26 - DoH\DoT Availability
2025-07-02 17:46:29
Bump. The last of dev replies here is concerning.
  2  
  2  
#4
Options
Re: Deco X55_V1.26 - DoH\DoT Availability
2025-07-03 19:50:42

  @Jason-TP 

 

While I won't be able to answer some of your questions because i do not work for TP-Link I will try to answer the ones i know. TP-link uses a platform based approached when they release firmware updates. If you look at the chart at the following link https://community.tp-link.com/us/home/kb/detail/412754 we can tell what platform your X55 is on by using your firmware version 1.4.6. If we look at the chart your X55 is on the following platform 1.10.0

 

26ddba901c36411a8f3516aca7cd6e53

 

The DoH\DoT option you are looking for are only available on platform 1.12.0 

 

f3447fb46137461fbcb2be0c0588d9fa

 

So your X55 is currently two platform versions behind. The next step will be for them to upgrade the X55 to platform version 1.11.0 however there have been cases where they upgraded a model by more than one platform example 1.10.0 to 1.12.0

 

I am currently trying to get TP-Link to get all models and hardware versions upgraded to platform 1.10.0, followed by updates to 1.11.0 and eventually 1.12.0, before new features or options are added. As of this post I haven't heard back from them if they are going to use this approach or not. 

 

As for the different hardware versions i found a few post you can look over

 

https://community.tp-link.com/en/business/forum/topic/273678

 

https://community.tp-link.com/en/home/forum/topic/604900

 

The rest of your questions I'm not sure of the answers sorry 

 

 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#5
Options