Archer AXE75 Daily Reset Needed
I've had to reset my AXE75 at least once a day for the past couple of weeks or so. The wireless signal has been going out. The app however reports everything is fine. A reset works but varies in terms of how long things return to normal.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
OK, so tl;dr the culprit of my issue appears to be my Firewalla Purple and not my Archer.
After downgrading to the previous firmware I was still having issues with connectivity dropping out. One thing I had noticed throughout this ordeal was that every time I rebooted my Archer the Firewalla would send me a notification that it had rebooted. Pretty curious since the Firewalla sits upstream from the Archer. So, after doing a factory reset and updating to the latest firmware on the Archer and still having issues that seemed like the only remaining option. Just now the connection went down again and this time I rebooted the Firewalla and lo and behold the connections were restored.
So, I've got my answer. I guess my advice to everyone out there is to keep working the problem and rule things out. Hopefully you will eventually find your answer.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Same here... With a wired connection, I consistently get around 940/440 Mbps. However, after updating to this release, I can only get about 600/200 Mbps. I've tried everything in the wireless settings, but nothing seems to work. And a strange thing is that the WiFi Analyzer shows around -54 dBm even right next to the router
- Copy Link
- Report Inappropriate Content
@TiagoAugusto, I just logged into the web interface of the router and uploaded the previous firmware update (after downloading a backup of the router configuration.) I can't confirm whether this resolved these issues yet but I think it's probably a fix until a new firmware update is rolled out.
- Copy Link
- Report Inappropriate Content
OK, so tl;dr the culprit of my issue appears to be my Firewalla Purple and not my Archer.
After downgrading to the previous firmware I was still having issues with connectivity dropping out. One thing I had noticed throughout this ordeal was that every time I rebooted my Archer the Firewalla would send me a notification that it had rebooted. Pretty curious since the Firewalla sits upstream from the Archer. So, after doing a factory reset and updating to the latest firmware on the Archer and still having issues that seemed like the only remaining option. Just now the connection went down again and this time I rebooted the Firewalla and lo and behold the connections were restored.
So, I've got my answer. I guess my advice to everyone out there is to keep working the problem and rule things out. Hopefully you will eventually find your answer.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 542
Replies: 4
Voters 0
No one has voted for it yet.