Archer BE230 Led Controller DEBUG [1904] Failed to read USB3
Archer BE230 Led Controller DEBUG [1904] Failed to read USB3
Only getting USB2 speeds on usb share with wired connection. Have tried with multiple drives.
Archer BE230 v1.26 with latest firmware
Led Controller ERROR [1904] Config importing failed
Led Controller DEBUG [1904] Failed to read USB3
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Joseph-TP Its something weird with these model after few hours work its says: No USB storage device found. Insert one into a USB port on your router and try again. I have two BE230 connected in mesh network. Tried with the both, and the problem is same. I dont think the router can manage larger than 2TB SSD.
- Copy Link
- Report Inappropriate Content
Hi @Nigel00 ,
Thanks for getting back to us.
Your case has been escalated to the engineer. Please pay attention to the email reply.
If you get a solution, it would be welcome if you share it here.
- Copy Link
- Report Inappropriate Content
Hello can I re-escalate the problem again. I missed the support.The problem still exist
- Copy Link
- Report Inappropriate Content
Hi @Nigel00 ,
You can reply to the engineer via TKID260218912.
- Copy Link
- Report Inappropriate Content
# Archer BE230 System Log
# Time = 2026-05-03 08:49:46
# H-Ver = 1.0.0 ; S-Ver = 1.2.5 Build 20260416 rel.60960
####################################################################
2026-05-03 08:48:27 usbshare[794]: <5> 291254 MiniDLNA start
2026-05-03 08:48:27 usbshare[794]: <5> 291252 ProFTPd start
2026-05-03 08:48:27 usbshare[794]: <5> 291250 Samba start
2026-05-03 08:48:27 usbshare[794]: <5> 291255 MiniDLNA stop
2026-05-03 08:48:27 usbshare[794]: <5> 291253 ProFTPd stop
2026-05-03 08:48:27 usbshare[794]: <5> 291251 Samba stop
2026-05-03 08:48:27 led-controller[2019]: <3> 288753 Config importing failed
2026-05-03 08:48:27 led-controller[2019]: <7> 288009 Failed to read USB3
2026-05-03 08:48:21 usbshare[545]: <5> 291254 MiniDLNA start
2026-05-03 08:48:21 usbshare[545]: <5> 291252 ProFTPd start
2026-05-03 08:48:21 usbshare[545]: <5> 291250 Samba start
2026-05-03 08:48:21 usbshare[545]: <5> 291255 MiniDLNA stop
2026-05-03 08:48:21 usbshare[545]: <5> 291253 ProFTPd stop
2026-05-03 08:48:21 usbshare[545]: <5> 291251 Samba stop
2026-05-03 08:48:21 led-controller[2019]: <3> 288753 Config importing failed
2026-05-03 08:48:21 led-controller[2019]: <7> 288009 Failed to read USB3
2026-05-03 08:48:21 usbshare[545]: <5> 291255 MiniDLNA stop
2026-05-03 08:48:20 usbshare[545]: <5> 291253 ProFTPd stop
2026-05-03 08:48:20 usbshare[545]: <5> 291251 Samba stop
2026-05-03 08:47:52 led-controller[2019]: <3> 288753 Config importing failed
2026-05-03 08:47:52 led-controller[2019]: <7> 288009 Failed to read USB3
2026-05-03 08:45:51 led-controller[2019]: <6> 288051 Start to run USB2
2026-05-03 08:45:49 led-controller[2019]: <6> 288051 Start to run USB2_twinkle
2026-05-03 08:45:48 led-controller[2019]: <6> 288051 Start to run USB2_twinkle
For statistics, the same problem exists on beta firmware 1.2.5 Build 20260416 rel.60960.
1. When connecting an external USB 3.0 flash drive, the logs show three failed USB 3.0 mode startups and network services restarts.
2. Network access to the drive is possible (SMB), but the access speed is USB 2.0.
This is a regular SanDisk Ultra Fit 64GB. No power overload or large volumes.
Conclusion: USB 3.0 mode support is either non-functional or absent.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1187
Replies: 15
Voters 0
No one has voted for it yet.