Home

Forums

Stories

Knowledge Base

TP-Link Community > Tapo Smart Cameras > C210 Camera Patrol - Can it be configured to only patrol specified path area?

< Tapo Smart Cameras

C210 Camera Patrol - Can it be configured to only patrol specified path area?

C210 Camera Patrol - Can it be configured to only patrol specified path area?

C210 Camera Patrol - Can it be configured to only patrol specified path area?

2 weeks ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2025-11-06

C210 Camera Patrol - Can it be configured to only patrol specified path area?

2 weeks ago

Tags: #Motion Detection / Activity Zones

Model: Tapo C210

Hardware Version: V3

Firmware Version: 1.2.1 Build 251011 Rel. 61780n

Trying to determine, if there is a way to configure the Patrol to ONLY patrol a path of about 100 degrees.

I have tried to select the 180 degree, but it ignores it and scans 360 degrees, which is problematic since the camera sits in a corner and it likes to stare at the wall, which it would never detect anything while looking at the wall.

Any ideas?

RJ Smith

0

0

#1

1 Reply

a week ago

Posts: 17728

Helpful: 3068

Solutions: 3757

Stories: 8

Registered: 2020-05-19

Re:C210 Camera Patrol - Can it be configured to only patrol specified path area?

a week ago

Hi,
You can refer to Q3 in the following instructions to use the Patrol feature on the Tapo cameras.
General questions about the TP-Link camera's Pan & Tilt feature

On the Tapo C210's Live View > Pan & Tilt > Patrol page, if you tap the Vertical Patrol or Horizontal Patrol button, the camera will patrol vertically or horizontally once, then return to its previous position rather than stare at the wall.

Best Regards

>> What to do if the Detection feature is not working on the TP-Link Camera. >> Enhance Video Clarity: Troubleshooting Tips for Improving Camera Video Quality. >> General questions about the TP-Link camera's Pan & Tilt feature.

0

0

#2