Using the Archer AX4400 as an booster?

Using the Archer AX4400 as an booster?

Using the Archer AX4400 as an booster?
Using the Archer AX4400 as an booster?
5 hours ago
Model: Archer AX4400  
Hardware Version: V2
Firmware Version: Unknown

Unfortunately, we moved into a desert house in Arizona, and the "Amenities" are less than desirable.  No cable, no dsl, no fiber, just a whopping fast 300meg 5G. 0d45147bd1f34b319d73f3727f6bff37 So, we have their 5G router/modem to run 2 gamers, one working from home and another occasionally, 3 TVs and security. What fun!  Anyway, of course the router is close to the two that work from home. So range for the other end just makes it worse. So, I bought the router a little while before we moved and thought I may as well put it to work.  I know it's overkill for this task, but... if it helps clear up the signal.  I found a couple outdated manuals that were pretty worthless. 

One of them said to set the WDS Range Extender mode. Which I didn't see as an option, so it stopped there. 

There instructions out there to help set this up?

Thanks!

0
0
#1
1 Reply
Re:Using the Archer AX4400 as an booster?
4 hours ago

  @ThePhilster001 

 

That router supports only router mode and Access Point Mode. You can try AP mode to see if that works for you.

 

Best to get an inexpensive extender and place it where you get a good signal from the main router and the devices can also get to the extender. 

0
0
#2