Not reaching good speeds with TL-PA7017P KIT

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Not reaching good speeds with TL-PA7017P KIT

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Not reaching good speeds with TL-PA7017P KIT
Not reaching good speeds with TL-PA7017P KIT
2022-04-10 11:45:22
Model: TL-PA7010P KIT  
Hardware Version: V4
Firmware Version:

Hi ive recently set up a powerline to replace the wireless mesh system in which i was getting around 500mbs but now with the powerline it has dropped to around 200 mbs. I have attached the results below:

 

 

This is the new speeds im getting with the powerline

82e8c36e7b5e45599785491cc8e99e54

 

 

 

This is the link rate between the powerlines

aa0b6bf568fb41ea9481444e454319ca

 

 

 

This is the speed when connecting my PC directly to router

  0      
  0      
#1
Options
1 Reply
Re:Not reaching good speeds with TL-PA7017P KIT
2022-04-11 08:56:26

Hello  @HBH786 

Thank you for reaching out to us. Speed will get reduced while signal being transmitted through powerline and the  real speed is closely related to the powerline rate and also the speed coming from the router. In the actual household environment, real speed test could be 20% to 35% of the Powerline rate and also capped by ISP bandwidth or router speed. Here is a related FAQ explaining the Powerline Rate and Actual speed of the Powerline Adapters: 

Explanation about the Powerline Rate and Actual speed of the Powerline Adapters

 

From the photo you provided, the speed test around 220Mbps should reasonable for 760Mbps powerline rate. 

Hope this helps explain the situation. 

  0  
  0  
#2
Options