Improve Point Signal Strength
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a Deco X55 system with 3 devices. My 2 points only have a "Fair" signal, but all devices appear to connect to these points and work ok. But I'd like to improve the signal to these 2 points if possible.
Unfortunately I can't improve the signals by bringing BOTH the 2 points closer to the router, and also can't move the location of the router itself. It is possible to locate a 3rd point in-between the 2 points if that might help. I would have to purchase that additional device. My question is: Would purchasing another Device (creating a 3rd point in-between the router and the existing 2 points) improve the signal to existing points? I'm not a networking expert and I'm not sure if points can (or ideally should) be Daisy-Chained in that way. And even if the signal to the existing 2 points can be improved by adding a 3rd point, I'm guessing the speed of devices connected to those farthest points might be worse having to go through another hop to get to the router. I'm trying to avoid purchasing another point and discovering it made no improvement.
Thanks in advance for your assistance.
Hi, is there any chance that you could connect the satellite Deco X55 via an Ethernet cable to the nearby Deco, like:
General questions about Ethernet Backhaul feature on your Deco
main Deco---cable>---2nd Deco X55---cable>---3rd Deco X55
/---cable>---2nd Deco X55
main Deco---
\---cable>----3rd Deco X55
Or have you used powerline adapters before? A pair of powerline adapters could also be used to create an "Ethernet Bridge",such as:
Adding a 3rd Deco does help improve the signal to existing points but as you mentioned, the speed of devices connected to those farthest points might be worse having to go through another hop to get to the router.
Best regards.
