Forums/
Deco
Yesterday
@BritG1 You can set the BE63s as AP with Deco Mesh, by switching the mode in the primary Deco router. As APs they can all connect directly to the main switch or in your case the GigaSpire, (and...
0HELPFULS
Forums/
Deco
Yesterday
@BritG1 I am sometimes (from long ago past experience) paranoid that the ISP is trying to force you to use their equipment. (Yes I am in partial acceptance that this practice may now be ancient). My...
0HELPFULS
Forums/
Range Extenders
Yesterday
I bumped into the TP-Link 24-hr Tech (I chose Chat) Support. It gave a list of possible solutions to try, of which the first three I had already tried, (off the top of my head): Try both Tether App...
0HELPFULS
Forums/
Deco
Yesterday
@ITguy2025 Confirms you have the correct latest firmware. Are you able to set a reboot schedule on the X55 to see if that helps?
0HELPFULS
Forums/
Deco
Yesterday
@BritG1 There is a (typical) maximum length of a single Ethernet connection of 100 m or 328 ft. Since you simply swapped the connection and it worked I suspect I can rule that out. Cat 8 at 2.5 GbE...
0HELPFULS
Forums/
Deco
Yesterday
@ITguy2025 This X55 model has hardware versions: V1 V1.26 V1.32 V1.60 Take a peek under each unit and verify you have the correct and latest firmware for each. Still trying to make sense of it as I...
0HELPFULS