Forums/
Deco
2025-10-19 12:34:33
@Homeusr I went to the link you provided. The solution, at least the temporary one you refer to, I believe is to manually select the WAN port, "fixing it to the one port you connected to the...
0HELPFULS
Forums/
Wi-Fi Routers
2025-10-19 12:01:27
@McDx Please see this troubleshooting guide and contact support: https://www.tp-link.com/us/support/faq/3649/ https://www.tp-link.com/us/support/contact-technical-support/
0HELPFULS
Forums/
Wi-Fi Routers
2025-10-19 11:51:48
@SanDiegoPhil What is the IP and Subnet of the Primary Router? What is the Subnet of the AX6000. IF the subnet is 255.255.255.0 then the primary router's IP and the AP should match 192.168.1.xxx and...
0HELPFULS
Forums/
Deco
2025-10-19 01:39:36
@Hardware_Nut From what I researched unfortunately Aginet is not compatible with Deco routers. Your closest bet is to wire the primary unit and set is as AP and use the 2nd as a Deco mesh node. Try...
0HELPFULS
Forums/
Deco
2025-10-18 22:11:31
@Hardware_Nut So as I understand adding the new Decos should be a function on the app. Especially after resetting them they should be visible. Have you tried adding them there on this Aginet app?
0HELPFULS
Forums/
Deco
2025-10-18 21:40:54
@Baseball_jp I just realized there is updated firmware available. It warns irreversible but I still think it's a good idea to update all the nodes. Please update and check whether the system is...
1HELPFULS