Forums/
Deco
2025-08-04 04:49:11
@Ohnopotato This FAQ explains a little more about switching to ethernet backhaul: General questions about Ethernet Backhaul feature on your Deco | TP-Link First it seems WiFi backhaul should be...
0HELPFULS
Forums/
Deco
2025-08-03 14:17:09
@HelpFixDecoApp Thanks for sharing that list. I've run my Deco in AP mode before TP-Link opened 6 GHz-2 to device use... I read through it, and isn't it a lot of those missing features can be...
0HELPFULS
Forums/
Deco
2025-08-03 01:32:19
@rtw819 If this is available in router mode, can you turn Jumbo packets on then change router mode to AP mode. (Crossing fingers the MTU setting does not reset)...
0HELPFULS
Forums/
Deco
2025-08-03 01:28:42
@Mchevownr016 Not a TP-Link router, but UPS (the cheaper simulated sine wave type) can cause noise interference on WiFi. Tested a WiFi 7 router out then installed a UPS for it, and surprise all of a...
1HELPFULS
Forums/
Deco
2025-08-03 01:16:38
@Ohnopotato Not sure if you have to give up on anything except Deco mesh across BE23 and XE75. Set up one BE23 as router, mesh the other 2. Change the current XE75 router to Access Point mode, mesh...
0HELPFULS
Forums/
Deco
2025-08-02 22:37:49
@billpall2 I believe this is 100 meters, or 328 ft.
0HELPFULS