Forums/
Wi-Fi Routers
2023-09-21 23:56:42
@pdegan2814 Try 20 MHz for width, a/n/ac for node and Auto for channel. You area may not support the higher wider bands due to other uses.
0HELPFULS
Forums/
Wi-Fi Routers
2023-09-21 23:48:38
@UK123 Most IoT devices connect to the 2.4. Try deleting/forget the network on the device if you can. On some of them you may need to reset the device to factory and set it up again. Use different...
0HELPFULS
Forums/
Wi-Fi Routers
2023-09-21 23:41:36
@Kojootti_ I suspect your internet connection since it failed with pc as the pc may be for forgiving than the router. Do check and try different ethernet cables and do look at the connections for...
0HELPFULS
Forums/
Wi-Fi Routers
2023-09-20 21:45:21
@LinkFan go to advance/system tools/administration to change the router password. I do do use smart connect as it limits my control over my network. I use different ssids and passwords for each band...
0HELPFULS
Forums/
Wi-Fi Routers
2023-09-20 09:43:55
@Kojootti_ I assume you have an ethernet connection to your router. I would first bypass the router and connect the pc direct and see if you do have a stable connection as it does not sound like a...
0HELPFULS
Forums/
Wi-Fi Routers
2023-09-19 23:46:55
@Eko23 one thing to try is to delete/forget the network on each device and reestablish it. Very common with apple products when you change routers and use same ssid. check and try different mode and...
0HELPFULS