Forums/
Wi-Fi Routers
2023-10-27 23:29:16
@ieee488 Smart connect turns both on using the same ssid. That is one reason I do not use smart connect.
0HELPFULS
Forums/
Wi-Fi Routers
2023-10-27 23:24:40
@malada Assuming you are not using a vpn, that does not seem correct. Are you using IPv6 or using QoS? You can try turning off any security. I would contact support and try to geta new unit.
0HELPFULS
Forums/
Wi-Fi Routers
2023-10-24 00:54:23
@malada bypass the router and connect the pc to the modem and check the speed.
0HELPFULS
Forums/
Wi-Fi Routers
2023-10-24 00:51:20
@Justinkelly_446 if just the tv, delete (forget) the network and readd it. Common problem when changing routers.
0HELPFULS
Forums/
Wi-Fi Routers
2023-10-24 00:49:03
@Pierangelo No. Google tp link onemesh for routers that support onemesh and they only mesh with extenders. you can connect two routers with one in router mode and the other in AP mode. Not as good....
0HELPFULS
Forums/
Wi-Fi Routers
2023-10-20 02:06:49
@Theskater101388 most likely you need to reserve an ip address for the nvr such as 192.168.x.x where the x is in your pool range and then set up port forwarding. Look at your existing nvr or old...
1HELPFULS