ArcherC8LV5Offline
Following: 0Followers: 9
Forums/ Wi-Fi Routers
2025-06-17 12:49:18
Re:Best way to extend the range of an Archer BE550
@MusherMan Router placement does make a difference. Just a few feet, higher is better most times, what is near by such as other electronics affect the signals. So try different things. The 2.4 GHz...
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-17 12:38:49
Re:VPN on Archer AX3000?
@LilBro3 Assuming you have a version 1, I went to the emulator and the Open VPN is under the advance settings/VPN Server in the menu.
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-17 12:35:12
Re:BE9500 Mesh Configuration
@jthillmn So what you have done is leave the Xfinity Gateway as the main router. Just added APs to extend the coverage which also works but also means you are not using it as MESH system which is...
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-16 19:55:04
Re:Router won’t connect to Ethernet wall port
@Matthew10 Are you connecting to their modem? What router was connected before? When connecting a new router to a modem, you will note that the instructions say to power off the modem during the...
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-16 19:45:29
Re:BE9500 Mesh Configuration
@jthillmn I do not use MESH. Generally, when you connect any router to the ISPs modem/router, (gateway) you need to put the ISP's gateway into bridge mode, Power off and unplu the ISP's gateway for...
0HELPFULS
Forums/ Wi-Fi Routers
2025-06-16 19:38:23
Re:TPLink AX1450 no longer works after changing default network IP rane
@TwitLink After making the change, try powering off and unpluging both the modem and the router. Wait 5-10 min, power he modem on, wait for it to connect, then power on the router.
0HELPFULS
1131415...