ArcherC8LV5Offline
Following: 0Followers: 9
Forums/ Wi-Fi Routers
2020-11-24 14:02:01
Re:TP-Link Archer C7 v5 port flapping
Have not had that issue. Some things I would try is first bypass the router and connect a PC direct to the ISP bypassing the router to see if you have the error. If no error, then reattach the router...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-24 13:54:20
Re:Upgrade Failed
By upgrade, I assume you mean a firmware upgrade. We may need more info. What process did you try? Power off the router and back on to see if that makes a difference. When it comes back on, what...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-24 13:44:25
Re:Unable to write to HDD attached to USB port on router
I am not a Windows guy, but what I would try is to see if you can access the drive when attached to a PC as it may be the drive. Be sure the router firmware is up to date. Check the settings in the...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-24 13:32:30
Re:Open source firmware for C50v2
There is no officially supported alternate firmware for TP Link routers as the only supported firmware is the firmware that comes from TP Link. There are other companies that install third party...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-22 12:19:23
Re:I’m trying to install a mini plug in
I do not have the mini plug but do have several Wyze plugs which are about the same. If you previously had the plug on a different router especially if the SSID is the same, then on many devices you...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-22 12:09:04
Re:AX1800 Not Getting Gigabit Speeds Wired
The most common cause for the speed to be below 100 is the Ethernet cable. Only four wires are used for 100 speeds and eight are needed to get faster speeds. Use a quality Cat 5E or Cat 6 cable. The...
0HELPFULS
1206207208...