Forums/
Wi-Fi Routers
2020-08-27 14:17:23
I agree with you that companies should not market product features that are not available. I worked in tech and had seen many times where products/software was sold with the promise of specific...
1HELPFULS
Forums/
Wi-Fi Routers
2020-08-27 11:49:44
First I would bypass the router and connect a PC direct to the modem and see what speeds and Ping time you get. If not good, then you may need to get the ISP involved as it could be the modem, your...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-26 14:51:30
Be sure to power off and on the router after making and saving changes as some settings happen on the next power up. Also allows for you to ensure the changes took place and if you have a power...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-26 12:38:28
I would try replacing the Ethernet cables with at least Cat 5E. You may have a bad cable. Gigibit speeds use all eight wires where the 100 Mbps use only four wires. Look at the pins in the cable and...
1HELPFULS
Forums/
Wi-Fi Routers
2020-08-25 11:54:28
Are you having issues with both 2.4 GHz and 5 GHz bands. Some devices are more sensitive to bandwidth so that may be a setting you may want to change. Change NAT Boost. Did you update your Surface 2...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-24 14:25:28
Can you set up port forwarding on the VR1600v for the Netgear switch with the cameras and robot? If so, can you set up a DDNS using your IP address from the ISP instead of the IP address of the VPN...
1HELPFULS