Forums/
Wi-Fi Routers
2020-08-12 15:50:12
I use a different SSID names on the extender (my SSID with a suffix of .ext). I set it up using one band as a backhaul as the devices can handle either band. Only on very rare case have I needed to...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-12 13:09:34
Some of the TP Link routers offer One Mesh which allows you to make a Mesh system with multiple routers. See https://www.tp-link.com/us/onemesh/compatibility/. Although I do not currently have a Mesh...
2HELPFULS
Forums/
Wi-Fi Routers
2020-08-12 12:51:22
I have done some research on One Mesh and Mesh systems as I like to know in advance when it becomes time to replace my non-Mesh router an Archer C8 and RE220 extender. Right now I am leaning toward a...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-12 12:34:52
Power cycle is just power off the device and power it back on. When power cycling the modem, router and PC, I power all down and power them up in order, modem first, wait for it to stabilize, then...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-11 15:00:05
The A7 should allow you to set up OneMesh. See the specs at https://www.tp-link.com/us/home-networking/wifi-router/archer-a7/#specifications and https://www.tp-link.com/us/onemesh/compatibility/.
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-11 11:59:09
Mostly depends on the device as it selects the band. I prefer separate SSID names as it helps to determine what is going on if an issue occurs and allows me to balance the loads. Sounds like you want...
1HELPFULS