Forums/
Wi-Fi Routers
2020-08-26 14:51:30
Be sure to power off and on the router after making and saving changes as some settings happen on the next power up. Also allows for you to ensure the changes took place and if you have a power...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-26 12:38:28
I would try replacing the Ethernet cables with at least Cat 5E. You may have a bad cable. Gigibit speeds use all eight wires where the 100 Mbps use only four wires. Look at the pins in the cable and...
1HELPFULS
Forums/
Wi-Fi Routers
2020-08-25 11:54:28
Are you having issues with both 2.4 GHz and 5 GHz bands. Some devices are more sensitive to bandwidth so that may be a setting you may want to change. Change NAT Boost. Did you update your Surface 2...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-24 14:25:28
Can you set up port forwarding on the VR1600v for the Netgear switch with the cameras and robot? If so, can you set up a DDNS using your IP address from the ISP instead of the IP address of the VPN...
1HELPFULS
Forums/
Wi-Fi Routers
2020-08-24 12:31:59
Connect the PC via Ethernet direct bypassing the Archer A6 and see what speeds you get. If you do not get the speeds you are paying for, contact the ISP. We are assuming that your PC is capable of...
0HELPFULS
Forums/
Wi-Fi Routers
2020-08-24 12:18:01
The Surface 2 has known issues with WIFI speeds. See https://answers.microsoft.com/en-us/surface/forum/all/slow-wifi-on-surface-book-2/da1e2e2b-070a-44cb-89a6-ff3001f41d0b for an example.
0HELPFULS