Forums/
Deco
2022-10-20 20:13:47
I've already had separate threads and support tikets. It just isn't very good at picking a clean channel and always sets a 40mhz 2.4ghz channel which is horrible in areas with interference (which is...
2HELPFULS
Forums/
Deco
2022-10-20 19:09:20
@Riley_S can the 2.4ghz channels settings be set by the user like Regular routers? By settings, I mean channel number and width. Can you force it to a channel and set bandwidth to 20mHz. My w3600...
3HELPFULS
Forums/
Kasa Smart Plugs
2021-11-04 15:20:59
@Solla-topee Access points are Asus RT-AX55. I have tried disabling WIFI 6 mode and it doesn't matter. They all have solid connections between 35 and 50dBm. Firmware is all up to date as far as the...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-11-01 20:25:34
I bought new access point that are 802.11ax capable. I setup the new access points with the same SSID as the old so everything would connect back up. I had intermittant problems with all of my Kasa...
0HELPFULS
Forums/
Kasa Smart Plugs
2020-07-29 02:56:24
@RickA since I switched the router to 20MHz 2.4GHz signal I haven't had the problem anymore. This is an Asus router too.
0HELPFULS
Forums/
Kasa Smart Switches
2020-01-31 15:25:19
@jrad I think neutral is needed to power the switch electronics
0HELPFULS