Forums/
Tapo Smart Plugs
18 hours ago
@Jrmccook Surge protection is a hardware design and does not require software activation, it is not the same as the Power Protection feature. Regarding your situation, please make sure your app is up...
0HELPFULS
Forums/
Tapo Smart Sensors
Thursday
@BDOman As the name suggests, the duplicate function creates a complete copy of your original automation setup. This can be very helpful when you need to create multiple automations with similar...
0HELPFULS
Forums/
Tapo Smart Plugs
Thursday
mycomac wrote @Wayne-TP scheduling works for turning off at sunset, but turning on at sunrise does not. if a set a fixed time to turn on at 6:30 am, that works, but scheduling to turn on at sunrise...
0HELPFULS
Forums/
Tapo Robot Vacuums
Thursday
@plz_help Has the location of your charging dock changed recently, or have there been any significant changes in the surrounding area? These could cause the robot to lose its position, and that in...
0HELPFULS
Forums/
Kasa Smart Plugs
Thursday
@StickMonkey Product firmware updates typically don’t change any device settings. If you remember around when the upgrade happened, we recommend reaching out to our support team, they may be able to...
0HELPFULS
Forums/
Tapo Smart Cameras
Thursday
@FlomaS What type of SD card are you using? Security cameras perform frequent read/write operations, and lower‑quality SD cards can quickly show instability or even fail under this kind of constant...
0HELPFULS