Forums/
Deco
2024-05-02 13:45:14
@echeng That would be a good troubleshooting approach. If the MoCa adapters are not the culprit, you can reboot the AP2 and if the issue persists to swap AP1 and AP4 to eliminate models mixing.
0HELPFULS
Forums/
Deco
2024-05-02 13:33:16
@mtinker33 Refer this thread for your issue.
2HELPFULS
Forums/
Wi-Fi Routers
2024-05-02 13:12:19
@maheshgv Since you can't downgrade from V1.1.1 you may try this test FW and check if the issue has been resolved.
0HELPFULS
Forums/
Wi-Fi Routers
2024-05-02 11:40:23
@Derocorp You have to be careful when you're buying Archer AX20. Up till HW v3 it supports VPN Client feature. HW v4 doesn't support it according to its datasheet and its user guide. On the other...
0HELPFULS
Forums/
Range Extenders
2024-05-02 11:15:22
@jimi52 Reset the RE500X to its factory defaults and re-configure from scratch. To reset the RE500X push its reset button for about 10 seconds (use a pin).
0HELPFULS
Forums/
Deco
2024-04-30 19:54:58
@nuclearjames IP Passthrough function is to use for example a 3-rd party mesh system behind it - check this article - <https>://help.sonic.com/hc/en-us/articles/1500000066642-BGW320 Using IP...
1HELPFULS