Forums/
Wi-Fi Routers
2024-05-06 00:21:20
@Kahakqnj This message usually appears if you try to put a private IP address for a DNS server in router Internet settings. When using Pi hole it's IP address should be set in the DHCP settings as a...
2HELPFULS
Forums/
Wi-Fi Routers
2024-05-06 00:19:45
@Johnnydec1 Yes, this way you'll always know to which band a particular device is connected.
0HELPFULS
Forums/
Wi-Fi Routers
2024-05-05 23:52:58
@Jojo99 It seems like there's an old configuration settings on that device. Blacklisted MAC addresses are devices that have been restricted to access your local network. What you can do is to factory...
0HELPFULS
Forums/
Wi-Fi Routers
2024-05-05 23:41:16
@Johnnydec1 Many models of Reolink cams can operate on both bands. I would suggest to turn off smart connect and name SSIDs differently. Then reset the Reolink cam and re-add to the new router SSID.
0HELPFULS
Forums/
Wi-Fi Routers
2024-05-02 23:50:28
@Toperr Downgrading FW procedure is the same as updating but with an older FW version - in this case v1.0.7.
1HELPFULS
Forums/
Adapters
2024-05-02 14:53:24
@PEEPO This could be due to a 5GHz wireless channels that are not supported on the TP-Link USB wireless adapter. You can change the hotspot wireless band by: Switch to 2.4 GHz on iPhone Step 1: Open...
8HELPFULS