Forums/
Wi-Fi Routers
2024-04-18 04:28:47
@casa26687 To have an internet on your new AXE75 you should copy Asus WAN (internet) port settings to the AXE75 WAN port. This includes Internet connection type, any username/password, etc. You might...
0HELPFULS
Forums/
Wi-Fi Routers
2024-04-17 23:11:29
@scraph Have you tried to reset the AX4400 and re-add to the Archer BE550 Essymesh. If you haven't, try that and check if there's any imrovement in stability. If there's no improvement, the other...
0HELPFULS
Forums/
Wi-Fi Routers
2024-04-17 15:14:54
@gandalf1369 It's correct as long as you use the WAN port of the router. The scenario I was pointing out is if you use Case 2 from this FAQ - apparently that's not your case. The last resort would be...
0HELPFULS
Forums/
Wi-Fi Routers
2024-04-17 13:35:44
@gandalf1369 Pay attention that in this scenario the device is still in router mode but it works as an AP. If you look at the diagram in the document the main router (white color) is connected to the...
0HELPFULS
Forums/
Wi-Fi Routers
2024-04-16 21:58:05
@gandalf1369 There are certain situations (very rare) that this could happen: 1. When the router works as an AP or a wireless switch - details. 2. When hardware NAT (NAT Boost) is disabled -...
0HELPFULS
Forums/
Deco
2024-04-16 16:44:13
@vncz If the Deco is in router mode this could work but you should not connect to this switch anything else since that may cause a network loops. One more thing - don't use a D-Link switch for that...
0HELPFULS