terziyskiLV7Online
Following: 0Followers: 41
Forums/ Deco
2024-04-16 15:23:44
Re:Enable Wifi6E in mixed mesh network
@vncz When in router mode main Deco should be connected directly to the modem - details. When using ethernet backhaul you can refer this FAQ and read through this thread. If Deco is about to be used...
0HELPFULS
Forums/ Range Extenders
2024-04-16 06:06:27
Re:Range extender re605x had no Internet during configuration
@M-collins_0929 Review your RE605X configuration. If nothing helps, I would recommend to reset the RE to its factory defaults and re-configure from scratch using this video guide. To reset the RE...
0HELPFULS
Forums/ Range Extenders
2024-04-16 05:58:46
Re:Multiple SSID Mesh Extension
When building a mesh network with a range extender there's a known limitation that won't allow you to extend the main router guest and IoT networks through the RE.
3HELPFULS
Forums/ Access Points
2024-04-16 04:01:39
Re:When I tried to browse to my WAP, it timed out. FW Rules should allow access.
@DonI49 I believe this is by design - web management access to be allowed only from the management VLAN 1. Here's a story which describes why Multi-VLAN mode APs may not work with different VLANs...
0HELPFULS
Forums/ Deco
2024-04-16 03:41:50
Re:Connecting Deco
@MsLady Deco units can work either in router mode or in AP mode - here's the difference. AP mode typical scenario is described here. Here's how to use Deco with your existing router.
0HELPFULS
Forums/ Deco
2024-04-16 03:30:29
Re:Enable Wifi6E in mixed mesh network
@vncz Go through this FAQ to see why when mixing different Deco units in one network.
0HELPFULS
1505152...