Forums/
Wi-Fi Routers
2024-03-20 10:25:58
@MarceloGV Do a factory reset of the updated AX12 to its factory defaults and re-configure from scratch - then check if there's any improvement.
0HELPFULS
Forums/
Powerline Adapters
2024-03-19 23:07:35
@Jay_L Probably this qualifies as a feature request - there's a specific section in the community where you can file such one:
0HELPFULS
Forums/
Powerline Adapters
2024-03-19 20:34:22
@Jay_L The point was that only a reset can be done trhough the tpPLC utility. There's a note in red text though: Note: After reset, the device may leave the original powerline network if this network...
0HELPFULS
Forums/
Powerline Adapters
2024-03-19 18:59:06
@Jay_L You can reset the PLC with the help of tpPLC utility - details. Here's a tpPLC utility user guide.
0HELPFULS
Forums/
Wi-Fi Routers
2024-03-19 18:44:07
@Jmayo Here's a guide for using a wireless router in AP mode. In this case your main router would be DHCP server for any devices in your network (including the AX3000).
0HELPFULS
Forums/
Wi-Fi Routers
2024-03-19 01:16:16
@icehawk940 Here's the official procedure for router recovery. - you should use Method 2 for the AX series router.
2HELPFULS