Forums/
Wi-Fi Routers
2024-02-15 00:06:56
@ladyh Good news - If you messed something up with WR940N you can reset to its factory defaults and start from scratch. Press its reset button for 10 seconds to reset the router when its powered on....
0HELPFULS
Forums/
Wi-Fi Routers
2024-02-14 22:57:48
@ladyh If the IP scanner shows that, then it's on your network and the best approach is to open its web management page in a web browser http://192.168.0.25
0HELPFULS
Forums/
Wi-Fi Routers
2024-02-14 22:27:47
@ladyh If your main router is Zyxel communications (modem) you have to to sure what's its wireless SSID. When clicking on Survey button in WR940N, you should select this very SSID (and correct...
0HELPFULS
Forums/
Wi-Fi Routers
2024-02-14 21:28:11
@ladyh If your main router wireless SSID is "NAME" set the WR940 extended network to "NAME_ext", thus you'll know to which SSID you're connected at any time. If your main router LAN IP address is...
1HELPFULS
Forums/
Wi-Fi Routers
2024-02-14 20:00:28
@PaulV2024 Here's how to find your TP-Link router IP address. If you're using Archer AX10 in AP mode (?) its IP address won't be the gateway as described in the guide. An easy way to find its IP...
0HELPFULS
Forums/
Wi-Fi Routers
2024-02-14 18:25:44
@ladyh Use this video for detailed setup steps for WR940N. When choosing an IP address for WR940N use an IP address in the same subnet your main router is. If your main router has a LAN IP address...
1HELPFULS