need to setup this router basically as an access point, from the main house router, cannot realistically connect to main house router via ethernet cable, needs a wireless host, it can only connect to

I noticed that the AX1800 is not available on the Download Center page, but it was previously. Can I use the firmware from the AX21 or was the AX1800 removed incorrectly?

It's a bit of a setup here. We have Starlink>CPE210 AP>CPE210 Client>AX1800 Router The router only recognizes the Client 210 as 10 Mbps. If I plug directly into the Client 210, I get full speed. Using

I'm trying to understand how client mode works on the TL-WA901N. If my existing wifi network uses 192.168.1.x with a gateway (and DHCP server) of 192.168.1.1, then how do I configure the LAN settings

So here is my question.... In Las Vegas, you are charged after the 1st 2 devices connect to the hotel WIFI. My thought was to take an ethernet 5 port switch, connect the switch, via the ethernet port

I'm having a fair bit of trouble with port forwarding. I set up the service on the specific port 19132 Found the device's ip that I want to forward to (ethernet connection straight from the router) pr