C110 camera Green LED Flickers constantly
I have ten total Tapo camera around the house several different models... and 5 are C110 v2.
I have one C110 that even though I disabled the LED Indicator under 'Device Settings' , the green light flickers constantly. Of course, this is in my home theater room, which needs to be dark 99% of the time. Anyone know if this is a bug?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
According to the Tapo C110 V2's UG, the flashing green LED on the camera indicates it's updating firmware.
In your situation, is the camera's system LED flashing green all day? Does the camera display online in the Tapo app? If so, please go to its Device Settings > Device Info page to check the firmware version info.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee that is not the problem, it is flickering (not flashing)... a flicker often happens when there is an issue with the power regulation or voltage leak issue (my background is electrial engineering). The flicking is likely caused by a defective component that is regulating that LED. I just wanted to see if this was a common issue.
- Copy Link
- Report Inappropriate Content
Hi,
The flickering green LED on the camera is not a common issue. Please ensure the C110 in your theater room is connected to the original power adapter and cord that comes with the camera in the package.
You can also swap the locations between the C110 in the theater room and another working C110 to test whether the flickering green phenomenon follows the camera or the location.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 102
Replies: 3
Voters 0
No one has voted for it yet.