Motion sensor switch KS200M suddenly doesn't work although enabled
I have a motion sensor switch KS200M that has worked fine for a year and a half as my garage light switch and then today I noticed the light didn't turn off. I checked the switch and the LED is on and I could manually click the button and see the LED ring go on/off. I can also control it via the app fine and see the LED ring go on/off. But, the actual light wouldn't turn on/off. I tried resetting the switch and even cut it at the breaker and turned it back on, but it wouldn't work, even manually.
I ended up taking the switch out, but then wanted to check one thing and put it back in and turned the power back on and it started working for some reason. I'm wondering if the switch is dying and I happened to just luck out or if there's something else going on. Anyone experience this before?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
When you were disconnecting the switch to take it out, did you happen to notice if any of the wires had become loose? It's possible that a loose connection could cause a similar behavior, even though I would have expected the power to also be cut.
Do you happen to know if the device received a firmware update at any point during this process?
When you reset the switch, did you use a soft or factory reset? If it was only a soft reset, it would explain why a reset did not solve the behavior.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
It's possible; however, I have never seen it before - and I imagine that your jiggling is lighter than what happens naturally during shipping and transit.
I believe that the switching sound you are hearing is the physical connection inside the switch being toggled. Separating the switch functionality from the physical operation is what allows for smart functionality, and I believe the noise that you are hearing can vary between devices.
Did you happen to make any changes to the rest of the lights, such as changing how much power the switch needed to deliver? Either way I would recommend keeping an eye on the light, to see if the behavior returns - if it does, you may consider getting in direct contact with our support team.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Same problem with my KS200M starting Feb 4. Everything "appears" operational... LED on device and status in app, BUT the garage light doesn't actually turn off.
- Copy Link
- Report Inappropriate Content
@SmartyPants Exactly same here. it does not turn off after a certain time. The LED light and app look working however the light always stay on. Anyone who solved the issue?
- Copy Link
- Report Inappropriate Content
@Openmind2 I'm experiencing the same issue with my switch. It turns on manually but doesn't activate when I enter the room, nor does it turn off automatically. I bought the switch about a week ago, and it was working fine until after the firmware update.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1209
Replies: 8
Voters 0
No one has voted for it yet.