Forums/
Deco
2019-05-06 23:34:06
@pockypok What mode are you using the Deco's in, Router or AP? I ask because the example you provided you said you are connecting a router to the 2nd unit. I just want to make sure that was just an...
0HELPFULS
Forums/
Access Points
2019-05-06 23:29:49
@Bafoon Yes the 1st unit needs to be set up in either "Router, Repeater, AP or WISP Router" mode depending on the deployment. The 2nd unit should be setup in "Client Mode". Best Regards
0HELPFULS
Forums/
Deco
2019-05-06 23:27:18
@Bigbit1225 Each Deco Unit has a two-port switch built in to use for ethernet/wired devices. The base unit will use one port as a WAN to connect to your modem. The rest are open to connect to...
1HELPFULS
Forums/
Range Extenders
2019-05-06 23:10:11
@Jacxl2b1 It sounds like you are trying to do what is called daisy chaining. What Daisy Chaining means is you are trying to connect 1 Range Extender to another. While in practice this is possible, in...
0HELPFULS
Forums/
Kasa Smart Switches
2019-05-06 23:03:27
@Addboy Try this video: https://www.youtube.com/watch?v=ENQGH-uYk34 and let us know if it helps at all. Also keep that wire colors are not standarize. Usually White-neutral Green-ground. Traveler and...
0HELPFULS
Forums/
Deco
2019-05-06 22:57:42
@KenWVT So a few possiblities here: 1. Your switch or switches are not Auto-MDI/MDIX complaint. If that is case you may need to connect the swtiches together using a Crossover cable or if they have...
1HELPFULS